Sleek and futuristic, the
L-7S is custom designed for the Yamaha TYROS Keyboard. Strong legs hold
up the keyboard while the intuitive design not only enhances support, but
also leaves ample legroom to play while seated. The keyboard sits securely
on the stand, supported by thick foam pads for maximum security and
reliability Click
here to buy
|
For those electronic keyboards with an
input jack labeled "SUSTAIN," the FC4 is used in the same manner the
sustain pedal on an acoustic piano is used. A specially designed
rubber bottom grips the floor and stays put while you play. The FC4
can also be utilized as an FS controller for synthesizers, tone
modules and drum machines. Works with any keyboard utilizing a
sustain pedal with a 1/4" connector. Included 6-foot cable 1/4"
phone plug.
Click Here to Buy
The UX16
USB-MIDI Interface is the easiest way to connect your musical keyboard to
your computer. If your computer has a Universal Serial Bus (USB) jack, you
simply connect the UX16 to your USB connector on your computer and plug the
MIDI in and out cables into your keyboard. You will have to install a
"driver" so that your computer knows about the UX16 and the driver is
included with the interface on a CD-ROM. The length of the USB cable is 2
feet and the length of the MIDI cables is a little over 4 feet. All Yamaha
portable keyboards made in the last few years have MIDI jacks on the back
(5-pin din jacks).
Most
Yamaha digital pianos, including Clavinovas, also have MIDI jacks on the
back. Any keyboard, including those not made by Yamaha, that has MIDI
connectors will work with the UX16. The UX16 can handle 16 channels of
simultaneous playback. It supports music production systems with one MIDI
OUT port (16 channels) and one MIDI IN port (16 channels). USB cable can be
connected and disconnected while the power to the computer is on. The UX16
operates on USB bus power and does not require a power adaptor or batteries.
The indicator lights show if the UX16 is connected properly to your USB jack
and there are also lights to indicate when it is receiving MIDI IN & OUT.
The number of ports can be expanded by using a USB hub to connect multiple
UX16 units. A maximum of 32 units can be connected, depending on system
capabilities